Question 6 of 610 from exam N10-007: CompTIA Network+

Question 6 of 610 from exam N10-007: CompTIA Network+

Prev Question Next Question

Question

SIMULATION - You have been tasked with setting up a wireless network in an office.

The network will consist of 3 Access Points and a single switch.

The network must meet the following parameters: -> The SSIDs need to be configured as CorpNet with a key of S3cr3t! -> The wireless signals should not interfere with each other -> The subnet the Access Points and switch are on should only support 30 devices maximum -> The Access Points should be configured to only support TKIP clients at a maximum speed INSTRUCTONS - Click on the wireless devices and review their information and adjust the settings of the access points to meet the given requirements.

If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

& Switch 1

192.168.1.2
Speed: Auto
Duplex: Auto
AP1 Configuration

@ © & | https://ap1setup.do

Basic Configuration

Access Point Name AP1

IP Address /
Gateway 192.168.1.1
SSID
SSID Broadcast «Yes No
Wireless Wired
Mode , Speed Auto # 100 | 1000
B
G
Channel , Duplex © Auto © Half Full
1
2
3
4
5
6
7
8
9
10
11

Security Configuration
Security Settings = * None © WEP — WPA © WPA2 © WPA2 - Enterprise

Key or Passphrase

=s xo
AP2 Configuration

@ © & | https://ap2.setup.do

Basic Configuration

Access Point Name AP2

IP Address /
Gateway 192.168.1.1
SSID
SSID Broadcast «Yes No
Wireless Wired
Mode , Speed Auto # 100 | 1000
B
G
Channel , Duplex © Auto © Half Full
1
2
3
4
5
6
7
8
9
10
11

Security Configuration
Security Settings = * None © WEP — WPA © WPA2 © WPA2 - Enterprise

Key or Passphrase

=s xo
AP3 Configuration

@ © & | https://ap3.setup.do

Basic Configuration

Access Point Name AP3

IP Address /
Gateway 192.168.1.1
SSID
SSID Broadcast «Yes No
Wireless Wired
Mode , Speed Auto # 100 | 1000
B
G
Channel , Duplex © Auto © Half Full
1
2
3
4
5
6
7
8
9
10
11

Security Configuration
Security Settings = * None © WEP — WPA © WPA2 © WPA2 - Enterprise

Key or Passphrase

=s xo

Explanations

See explanation below.

On the first exhibit, the layout should be as follows Access Point Name AP1 - IP Address 192.168.1.3 - Gateway 192.168.1.2 - SSID corpnet - SSID Broadcast yes - Mode G - Channel 1 - Speed Auto - Duplex Auto - WPA - Passphrase S3cr3t! Exhibit 2 as follows - Access Point Name AP2 - IP Address 192.168.1.4 - Gateway 192.168.1.2 - SSID corpnet - SSID Broadcast yes - Mode G - Channel 6 - Speed Auto - Duplex Auto - WPA - Passphrase S3cr3t! Exhibit 3 as follows - Access Point Name AP3 - IP Address 192.168.1.5 - Gateway 192.168.1.2 - SSID corpnet - SSID Broadcast yes - Mode G - Channel 11 - Speed Auto - Duplex Auto - WPA - Passphrase S3cr3t!