What are three approaches that are used when migrating from an IPv4 addressing scheme to an IPv6 scheme. (Choose three.)
Click on the arrows to vote for the correct answer
A. B. C. D. E. F.ACD
There are multiple approaches that can be used for migrating from IPv4 to IPv6 addressing scheme. However, among them, three common approaches are:
Enable Dual-Stack Routing: The first approach is to enable dual-stack routing on network devices. Dual-stack routing means that the devices will support both IPv4 and IPv6 addressing schemes. This approach allows both IPv4 and IPv6 traffic to coexist on the same network. Dual-stack devices are capable of running both IPv4 and IPv6 protocol stacks, allowing for a gradual transition from IPv4 to IPv6, as devices are upgraded or replaced.
Configure IPv6 directly: The second approach is to configure devices with IPv6 addresses directly. This is done by assigning IPv6 addresses to devices and configuring them to use IPv6 as their primary addressing scheme. IPv6 addresses can be assigned manually or using DHCPv6. Once the devices are configured with IPv6 addresses, they can communicate directly with other IPv6 devices.
Configure IPv4 tunnels between IPv6 islands: The third approach involves creating IPv4 tunnels between IPv6 islands. This approach is used when there are two separate IPv6 networks that need to communicate with each other, but there is an IPv4 network in between them. IPv4 tunnels allow IPv6 packets to be encapsulated in IPv4 packets and sent across the IPv4 network. Once the packets reach the other side of the IPv4 network, they are decapsulated, and the IPv6 packets are sent to their destination.
The other approaches mentioned in the question are:
Use proxying and translation to translate IPv6 packets into IPv4 packets: This approach involves using a gateway device to translate IPv6 packets into IPv4 packets. This allows devices on an IPv6 network to communicate with devices on an IPv4 network. However, this approach can be complex and may result in performance degradation.
Statically map IPv4 addresses to IPv6 addresses: This approach involves manually mapping IPv4 addresses to IPv6 addresses. This can be a time-consuming and error-prone process, especially in large networks.
Use DHCPv6 to map IPv4 addresses to IPv6 addresses: This approach involves using DHCPv6 to assign IPv6 addresses to devices based on their IPv4 addresses. This approach can simplify the process of assigning IPv6 addresses to devices, but it requires the use of DHCPv6 servers, which may not be available in all network environments.